Connecting To A Pc - Panasonic DMC-FX2GN Operating Instructions Manual

Connecting to a PC

• Refer to the separate operating
instructions about PC connection.
• If you use Windows 98/98SE, install the
USB driver and then connect it to the
computer.
• When using Windows Me/2000/XP, Mac
OS 9.x and Mac OS X, you do not have to
install the USB driver.
DIGITAL
AV OUT
DC IN
A: AC adaptor (DMW-CAC2; optional)
B: USB connection cable (supplied)
84
Connecting to a PC or Printer
1 Turn the camera on and set the
[USB MODE] according to the OS
you use.
• Set to [PC] or [PictBridge (PTP)]. Refer
to "Before Connecting with USB
Connection Cable" on page 82.
• If [USB MODE] is set to [PictBridge
(PTP)] while Windows XP or Mac OS X
is used, it is connected as PTP.
2 Connect the camera to a PC via
the USB connection cable B
(supplied).
• Connect the USB connection cable with
the [
the [DIGITAL] socket.
• Hold on the plug body C and push in to
the socket.
Depending on the USB mode setting, the
indications on the screen may vary. Refer
to page 85.
] mark facing the [1] mark on