Safety Decals - Ferris IS600z series Operator's Manual

2
• The seat belt like the ROLL BAR, needs to be periodically
inspected to verify that the integrity has not been
compromised through normal machine use, misuse, age
degradation, modifications, or a roll over. If the seat belt
does not pass all of the following tests, it should be replaced.
• BEFORE EACH USE – Conduct the following
inspections/maintenance of the seat belt and retraction
mechanism:
1) Check for dirt or debris in the retraction mechanism. If
dirt or debris is found, it should be removed.
2) Check to make sure the retraction mechanism retracts
easily and completely.
3) Check for damage to any part of the seat belt (A, Figure
2) such as nicks, cuts, loose stitching, or fraying.
4) Check that the buckle and latch (B) operate properly and
that the latch plate is not excessively worn, deformed, or
the buckle is damaged or cracked. The seat belt should
latch and release easily.
WARNING
U.S.A. Models: The engine exhaust from this product
contains chemicals known to the State of California to
cause cancer, birth defects, or other reproductive harm.
WARNING
Battery posts, terminals, and related accessories contain
lead and lead compounds, chemicals known to the State
of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.

Safety Decals

Before operating your unit, read the safety decals. The cautions
and warnings are for your safety. To avoid a personal injury or
damage to the unit, understand and follow all safety decals.
WARNING
If any safety decals become worn or damaged, and cannot
be read, order replacement decals from your local dealer.
10
3
A Part Number: 5103595 - Decal, Main Safety
B Part Number: 5103184 - Decal, Warning
C Part Number: 7101665 - Decal, Danger
D Part Number: 5100935 - Decal,
Warning & Caution, Roll Bar
E Part Number: 5100405 - Decal,
Warning, ROPS
ferrismowers.com