Table of Contents
Advertisement
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message
Busy
Dial locked
Error!!
Failed
Incomplete
Invalid.
Please register
to the base unit
No items stored
Cause/solution
L The called handset or base unit is in use.
L Privacy mode is on for the call you tried to join (page
28).
L Other units are in use and the system is busy. Try again
later.
L Dial lock is turned on. To turn it off, see page 29.
L The handset's registration has failed. Move the handset
and base unit away from all electrical appliances and try
again.
L 8 handsets have already been registered to the base
unit. A previously deregistered handset number may
still be retained in the base unit. To register an
additional handset, erase the unnecessary handset
number using the base unit:
Press and hold {INTERCOM} until the IN USE indicator
flashes. i Press and hold the handset's extension
number ({1} – {8}) that you want to cancel/delete from
the base unit until a beep sounds.
L The entered password was wrong in programming dial
lock. Enter the correct password.
L The handset you tried to copy phonebook items to is in
use.
L The handset you tried to copy phonebook items to is out
of area.
L The destination handset's phonebook memory is full.
Erase unnecessary items from the destination
handset's phonebook (page 33).
L The handset is not registered to the base unit. Register
the handset (page 58).
L Your phonebook or redial list is empty.
L Colour display models only (KX-TGA591AL):
"My pictures" is empty.
Useful Information
63
Advertisement
Table of Contents
