Table of Contents
Advertisement
Erasing a melody
Handset
1
{MENU} (middle soft key) i
{#}{1}{6}{6}
2
"List" i {SELECT}
3
Select the desired item. i {MENU}
4
"Erase" i {SELECT}
5
"Yes" i {SELECT} i {OFF}
Note:
L If the erased melody was used for the
handset ringer tone (page 47), "Tone 1"
(default) is used instead of that melody.
L If the erased melody was assigned to
certain callers as ringer ID (page 37), the
ringer ID assignment is cancelled, and
the handset ringer tone (page 47) is
used instead of that song.
Changing handset name
Each handset can be given a customised
name ("Bob", "Kitchen", etc.), this is useful
when you make intercom calls between
handsets. The default setting is "Handset
1" to "Handset 8".
You can also select whether or not the
handset name is displayed in standby
mode. The default setting is "Off".
Handset
1
{MENU} (middle soft key) i
{#}{1}{0}{4}
2
Enter the desired name (max. 10
characters; page 32).
L If not required, go to step 3.
3
{OK}
4
Select the desired setting. i {SAVE}
i {OFF}
Programming
49
Advertisement
Table of Contents
