Intercom/Locator
1
During an outside call, press
{INTERCOM} to put the call on hold.
2
Press the right soft key.
3
Wait for the paged party to answer.
L If the paged party does not
answer, press {C} to return to
the outside call.
4
To complete the transfer:
Press {OFF}.
L The outside call is being routed to
the destination unit.
To establish a conference call:
Press {Conf}.
L To leave the conference, press
{OFF}. The other parties can
continue the conversation.
L To put the outside call on hold,
press {HOLD}. To resume the
conference, press {Conf}.
Answering a transferred call
Press {C} to answer the page.
Note:
L After the paging party disconnects,
you can talk to the outside caller.
Handset locator
You can locate a misplaced handset by
paging it.
1
Base unit:
{LOCATOR}
L The handset beeps for 1 minute.
2
To stop paging:
Base unit:
Press {LOCATOR}.
Handset:
■ KX-TG4381/KX-TG4382
Press {OFF}.
40
■ KX-TG4391/KX-TG4392
Press {INTERCOM}, then press
{OFF}.
Note:
L When the ringer volume for outside
calls is set to off (page 24), the
handset rings at a low level for paging.