Message Alert - Panasonic KX-TG4381NZ Operating Instructions Manual

Answering System
your service provider/telephone
company.
Note:
L This service can capture messages
while the user is on a dial-up Internet
connection.
Caller's recording time
You can change the maximum message
recording time allotted to each caller.
You can also select "Greeting only"
which sets the unit to greet callers but
not record messages. The default
setting is "3min".
{MENU} i {#}{3}{0}{5}
1
{V}/{^}: Select the desired setting.
2
i {Save} i {OFF}
Note:
L If you want to select "Greeting
only", follow the steps above and
press {0} in step 2.
You may create your own greeting-
only message by following the steps
on page 32.
The unit plays the pre-recorded
greeting-only message asking callers
to call again if your own greeting-only
message is not recorded.

Message alert

You can select whether or not the
message indicator on the handset
flashes slowly when new messages are
recorded. The default setting is "On".
Important:
L The message indicator will also flash
slowly if there are new-recorded voice
mail messages (page 37).
{MENU} i {#}{3}{4}{0}
1
{V}/{^}: Select the desired setting.
2
i {Save} i {OFF}
36
Note:
L While message alert is on, battery
operating time is shortened (page 14).