Programming
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 22)
– using the direct commands (page 24)
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
{MENU}
1
Press {V} or {^} to select the desired main menu. i {Select}
2
Press {V} or {^} to select the desired item in sub-menu 1. i {Select}
3
L In some cases, you may need to select from sub-menu 2. i {Select}
Press {V} or {^} to select the desired setting. i {Save}
4
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 24 for the default settings.
Main menu
Message play
(KX-TG4391/
KX-TG4392)
V.M. access
Night mode
Ringer setting
Set date & time
*1
Dial lock
22
Sub-menu 1
–
–
On/Off
Start/End
Ringer volume
Ringer tone
*1
Date and time
Alarm
Time adjustment
–
Sub-menu 2
–
–
–
–
–
–
–
–
*1, *2
–
–
Page
33
37
26
26
–
–
15
26
–
19