Battery Charge - Panasonic KX-TG4381NZ Operating Instructions Manual

Preparation

Battery charge

Place the handset on the base unit or
charger for about 7 hours before
initial use.
L While charging, "Charging" is
displayed and the charge indicator on
the handset lights up. When the
batteries are fully charged, "Charge
completed" is displayed.
Base unit:
*1 KX-TG4382/KX-TG4392
Note:
L It is normal for the handset to feel
warm during charging.
L If you want to use the handset
immediately, charge the batteries for
at least 15 minutes.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
14
*1
Charger :
Battery level
Battery icon Battery level
5
High
6
Medium
7
Low
L When flashing:
8
Empty
Note:
L KX-TG4381/KX-TG4382
The batteries need to be charged if
the handset beeps while you are
engaged in a call.
L KX-TG4391/KX-TG4392
The batteries need to be charged if
the handset beeps while you are
engaged in a call or operating the
answering system remotely.
Panasonic Ni-MH battery
performance (supplied batteries)
Operation
In continuous
use
Not in use
(standby)
While using the
clarity booster
feature (page
19)
Note:
L Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
Needs to be
charged.
Operating time
5 hours max.
11 days max.
3 hours max.