Table of Contents
Advertisement
Using Bluetooth Devices
– "Trunk prefix": A trunk prefix; the initial
digit(s) to be dialed in a domestic call, prior
to the area code.
1
MMENUN
2
To store "International Code":
#117
To store "Country Code": #118
To store "Trunk prefix": #119
3
Enter the desired number. a MSAVEN
4
MOFFN
Note:
R After you copy the entries, confirm that the
numbers were transferred correctly.
Text message (SMS) alert
The handset can notify you when a cellular
phone that is paired to the base unit receives
a text message. The handset can notify you
by briefly displaying a message, by sounding
a ringer tone or melody, and by
announcement.
Important:
R To use the text message alert feature, you
need to pair your cellular phone to the base
unit (page 17).
R Your cellular phone must support Message
Access Profile (MAP) specification. We
recommend that you confirm if your cellular
phone supports MAP in advance.
R For more details and the list of compatible
cellular phones, please visit our Web site:
http://www.panasonic.ca/link2cell
For those whose devices do not support
the Message Access Profile (MAP):
By installing the app "Text Message Alert",
you can use the text message alert feature.
Please visit our Web site:
http://www.panasonic.net/pcc/support/tel/sms/
52
TGE26x_27xC(en)_1224_ver012.pdf
R Refer to your cellular phone operating
instructions for information on how to install
applications.
Setting text message (SMS) alert
The following settings are available. The
default is "On(no announce)".
– "On(no announce)": The handset
notifies you but does not make an
announcement.
– "On(with name)": The handset notifies
you and announces the name of the
message sender.
– "Off": The handset does not notify you.
Your cellular phone
In order to use the text message alert feature,
you may need to enable your cellular phone's
Bluetooth notification feature.
Handset
n Turning text message (SMS) alert on/off
1
For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
2
MbN: "On/Off" a MSELECTN
3
MbN: Select the desired setting.
4
MSAVEN a MOFFN
n Selecting the alerting tone
1
For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
2
MbN: "Alert tone" a MSELECTN
3
MbN: Select the desired setting.
4
MSAVEN a MOFFN
Note:
R If the text message alert feature does not
work, you must turn on notifications in the
Bluetooth settings of your cellular phone.
Then, unplug the base unit's AC adaptor
and reconnect it to activate the text
message alert feature. For instructions on
how to do this, visit our Web site:
http://www.panasonic.net/pcc/support/tel/
sms/
R The unit announces the name or phone
number depending on your cellular phone.
R This feature may not pronounce all names
correctly.
52
2013/12/24
15:43:32
Advertisement
Table of Contents
