Useful Features During A Call; Hold Button; Mute Button; Voice Enhancer - Panasonic KX-TG2421NZ Operating Instructions Manual

Making/Answering Calls
Useful features during a
call

HOLD button

This feature allows you to put an outside
call on hold.
Press {HOLD} during an outside call.
L "Hold" will be displayed.
L To return to the call, press {C} or {s}.
Note:
L If another phone is connected on the
same line (page 9), you can also take
the call by lifting its handset.
L If a call is kept on hold for more than 6
minutes, an alarm tone will start to
sound and the ringer indicator will flash
rapidly. After 4 additional minutes on
hold, the call will be disconnected.

MUTE button

You can mute your voice during a
conversation. While mute is turned on you
will be able to hear the other party, but the
other party will not be able to hear you.
To mute your voice, press {MUTE}.
Example:
L "<Mute>" will flash on the display.
L To return to the conversation, press
{MUTE}, {C}, or {s}.
18
Talk
00-00-30 <Mute>

Voice enhancer

This feature can simulate a band signal
above the normal bandwidth limitations,
achieving a sound which is close to the
actual voice. You can turn this feature on
or off, depending on the circumstance.
1
Press {MENU} during an outside call.
2
To turn this feature on or off, press {3}.
L You can also select "V.E. on" or
"V.E. off" by pressing {V} or {^}
then pressing {>}.
L When turned on, "J" will be
displayed.
Note:
L Once you turn voice enhancer on, it will
be activated for all outside calls until
turned off.
L You can also turn this feature on or off by
programming (page 29).
L Depending on the condition and quality
of your telephone line, this feature may
emphasise existing line noise. If it
becomes difficult to hear, turn this
feature off.

Clarity booster

This feature can improve sound clarity
when the handset is used in an area where
there may be interference. During an
outside call, this feature will be turned on
automatically when necessary. This
feature will turn off when you hang up or
put a call on hold. It will not turn off
automatically during a call. You can also
turn this feature on or off manually.
1
Press {MENU} during an outside call.
2
Press {2} to select "Booster on" or
"Booster off".
g3=V.E. on