Answering Calls; Useful Features During A Call - Panasonic KX-TGE633 Operating Instructions Manual

Answering calls

Using the handset
When a call is being received, the ringer
indicator flashes rapidly.
1
Lift the handset and then press M
M N when the unit rings.
2
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key (except 0 key).
Auto talk: You can answer calls simply by
lifting the handset (page 35).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
soft key).
Using the base unit
Available for:
KX-TGE640 series (page 3)
When a call is being received, the SP-PHONE
indicator flashes rapidly.
1
Press MZN when the unit rings.
2
Speak into the microphone.
3
When you finish talking, press MZN.
Adjusting the ringer volume
Handset
Press MjN or MkN repeatedly to select the
desired volume.
R To turn the ringer off, press MkN repeatedly.
Base unit
Press MjN or MkN repeatedly to select the
desired volume.
R To turn the ringer off, press and hold MkN
until the unit beeps.
For assistance, please visit http://shop.panasonic.com/support
KX-TGE63x_64xUSA_(en)_1213_ver031.pdf 17
Making/Answering Calls
One-touch ringer off for the handset
Press and hold 0 (
turn the ringer off. While the ringer is turned
off, the handset will not ring for calls.
R You can turn the ringer on again by:
– pressing and holding 0 (
unit beeps
N or
– pressing MjN repeatedly
Useful features during a
call
Hold
Handset
N (left
1
Press MMENUN during an outside call.
2
MbN: "Hold" a MSELECTN
3
To release hold, press M
R Another handset user can take the call
by pressing M
R The base unit user can take the call by
pressing MZN. (KX-TGE640 series:
page 3)
Base unit *1
*1 KX-TGE640 series: page 3
1
Press MHOLDN during an outside call.
2
To release hold, press MZN.
R A handset user can take the call by
pressing M
Note for handset and base unit:
R While an outside call is on hold, the
SP-PHONE indicator on the base unit
flashes.
R After holding for 10 minutes, the call is
disconnected.
Mute
Handset
1
Press MMUTEN during a call.
2
To return to the call, press MMUTEN.
) until the unit beeps to
) until the
N.
N.
N.
17
13/12/2017 4:29:17 PM