Panasonic KX-TG2344 Quick Setup Manual page 76

Troubleshooting
Problem
" FULL " flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
You cannot operate the
Answering System from the
base unit or the handset.
You cannot operate the
Answering System from a
touch tone phone.
You cannot erase messages.
When you play back
messages or turn on the
Answering System, the
handset and/or base unit
announces the wrong day
and time.
General
Problem
The handset and/or base unit
does not work.
Cause & Remedy
• Memory is full. Erase unnecessary messages
(p. 54).
• If another user is in use, you may not be able
to operate the Answering System. Try again
later.
• If another user is listening to messages or the
Answering System is handling a call, you
cannot operate the Answering System. Try
again later.
• Make sure you entered the correct remote
code (p. 56).
• The Answering System may not respond if the
tones are too short to activate the unit. Press
each button firmly.
• The Answering System is off. Turn it on
(p. 58).
• While another user is operating the Answering
System or a caller is leaving a message, you
cannot erase messages.
• The date and time may be set incorrectly. Set
the date and time again (p. 14).
Cause & Remedy
• Check the settings (p. 9–11).
• Check whether the dialing mode setting is
correct (p. 15).
• Fully charge the battery (p. 10).
• Clean the charge contacts and charge again
(p. 11).
• Check battery installation (p. 10).
• Unplug the base unit's AC adaptor to reset it.
Plug in, and try again.
• Re-install the battery (p. 10) and fully charge it.