Base Unit Display - Panasonic KX-TG2344 Quick Setup Manual

Location of Controls
Handset soft keys
J
Talk
00-00-32
K
(VE) Mute
Pressing the right soft key selects mute "Mute ".
Pressing the left soft key selects Voice Enhancer " (VE)".
• When a function name does not appear above a soft key, the soft key has no
function.
Handset navigator key
Throughout these Operating Instructions:
• The soft keys are indicated by what is displayed above the keys.
Ex. "Press Mute." indicates "Press the soft key below Mute ".
• The navigator key is indicated by the arrows [d] or [B].

Base unit display

FULL
LINE IN USE
" " functions as follows.
LINE IN USE
Off (invisible)
On
Flashing
Flashing rapidly
• " " displays when a handset is operating the Answering System.
IN USE
Message counter shows:
— the total number of recorded messages. If the recording time is set to
"Greeting only", "
— the selected volume level while you are adjusting the volume (p. 19).
— " " when your greeting message was not recorded correctly (p. 19).
Two soft keys are used to select functions displayed
5
directly above each key. Functions displayed above the
keys will change depending on the state of use.
L
On this sample display, " (VE)" and "Mute " are
displayed above soft keys.
Scrolls up [B] and down [d] the function menu, the Caller
List and the phone book.
Increases [B] or decreases [d] the handset ringer and
receiver/speaker volumes.
"
FULL
recorded. Erase unnecessary messages (p. 54).
"E" flashes until you set the date and time, and
flashes after a power failure. If it is flashing, set the
date and time (p. 14).
The line is free.
The line is being used.
A call is on hold on the handset or the Answering
System is answering a call (p. 49).
A call is being received.
" will be displayed (p. 20).
K
K
" flashes when no new messages can be
L
L
L