Panasonic KX-TG2344 Quick Setup Manual page 32

Making Calls
To dial after confirming the
entered number
1
Enter a phone number.
3334444|
K
Clear
• If you misdial, press Clear.
Enter the correct number.
• If a pause is required when
dialing, press Pause where
needed (p. 46).
• To cancel, press [OFF].
2
Press [C] or [s].
3
To hang up, press [OFF] or
place the handset on the base
unit or charger.
To adjust the receiver/
speaker volume during a
conversation
There are 3 volume levels for the
receiver and 6 volume levels for the
speaker.
To increase volume, press [B].
To decrease volume, press [d].
Ex. Receiver volume: High
Speaker volume: Level 6
Volume
Low
K
(VE)
• The display shows the current volume
setting.
• If you try to increase/decrease
volume when it is at the maximum/
minimum level, the handset will beep
3 times.
To redial the last number
dialed
Press [C] or [s], then press
[REDIAL].
L
Pause
High
L
Mute
To redial using the redial
list (Memory Redial)
The last 5 phone numbers dialed are
stored in the redial list.
1
Press [REDIAL].
333-4444
K
Erase
• The last number dialed is
displayed.
2
Scroll to the desired number by
pressing [d] or [B].
• You can also scroll down through
the list by pressing [REDIAL].
• To exit the list, press [OFF].
3
Press [C] or [s].
• To erase an item, scroll to the item
then press Erase.
• If "No items stored" is displayed,
the list is empty.
To put a call on hold
1
Press [HOLD/INTERCOM]
during a conversation.
• "Line on hold." is displayed.
• To transfer the call to another
handset, see page 43.
2
Press [HOLD/INTERCOM]
again.
• "Hold" is displayed.
To return to the call, press [C]
or [s].
• Another handset user can also take
the call by pressing [C] or [s].
• If another phone is connected on the
same line (p. 9), you can also take the
call by lifting its handset.
• If a call is kept on hold for 6 minutes,
an alarm tone will start to sound and
the Ringer/Message Alert indicator
will start to flash rapidly. After
4 additional minutes on hold, the call
will be disconnected.
dB