Table of Contents
Advertisement
TG7331-7341FX(e-e).book Page 46 Monday, July 28, 2008 8:57 AM
Intercom/Locator
L The outside call is routed to the
paged party.
Base unit
1
During an outside call, press {x} to
put the call on hold.
2
To page a specific handset, enter the
handset number.
To page all handsets, press {0}.
L When you page all handsets, only
the handset user who answers
first can take the transferred call.
3
Wait for the paged party to answer.
L If the paged party does not
answer, press {x} to return to the
outside call.
4
To complete the transfer, press {s}.
L The outside call is routed to the
handset.
Transferring a call without speaking
to the other unit's user
Handset
1
During an outside call, press {INT}
to put the call on hold.
L k flashes on the handset display
to indicate the outside call is on
hold.
2
To page the base unit, press {0}.
To page a specific handset, enter
the handset number.
3
{ih}
L The outside call rings at the
paged party.
Base unit
1
During an outside call, press {x} to
put the call on hold.
L The in use indicator on the base
unit flashes to indicate the outside
call is on hold.
46
2
To page a specific handset, enter
the handset number.
To page all handsets, press {0}.
3
{s}
L The outside call rings at the
handset.
Note for handset and base unit:
L If the paged party does not answer the
call within 1 minute, the call rings at
the paging party again.
Answering a transferred call
Handset
Press {C} to answer the page.
Base unit
Press {s} to answer the page.
Note for handset and base unit:
L After the paging party disconnects,
you can talk to the outside caller.
Conference calls
The handset and base unit, or 2
handsets can have a conference call
with an outside party.
The following 2 methods are available:
– Another person presses {C} on the
handset or {s} on the base unit while
one person is talking with an outside
party ("Call share", page 20).
– One person pages another person
during an outside call as follows.
Handset
1
During an outside call, press {INT}
to put the call on hold.
2
To page the base unit, press {0}.
To page a specific handset, enter the
handset number.
Advertisement
Table of Contents
