Table of Contents
Advertisement
TG7331-7341FX(e-e).book Page 30 Monday, July 28, 2008 8:57 AM
Programming
Increasing the range of the
base unit
You can increase the signal range of the
base unit by using a DECT repeater.
Please use only the Panasonic DECT
repeater noted on page 5. Contact your
Panasonic dealer for details.
Important:
L Before registering the repeater to this
base unit, you must turn the repeater
mode on.
L Do not use more than one repeater at
a time.
Setting the repeater mode
1
K (middle soft key)
2
{V}/{^}: "Base Unit Setup" i
M
3
{V}/{^}: "Repeater Mode" i
M
4
{V}/{^}: Select the desired setting.
i M i {ih}
Note:
L After turning the repeater mode on or
off, w flashes on the handset
momentarily. This is normal and the
handset can be used once w stops
flashing.
30
Advertisement
Table of Contents
