Table of Contents
Advertisement
TG7331-7341FX(e-e).book Page 37 Monday, July 28, 2008 8:57 AM
Answering system
Available for:
KX-TG7341
The answering system can answer and
record calls for you when you are
unavailable to answer the phone.
You can also set the unit to play a
greeting message but not to record
caller messages. Select "Greeting
Only" as the recording time setting
(page 43).
Important:
L Only 1 person can access the
answering system (listen to
messages, record a greeting
message, etc.) at a time.
L When callers leave messages, the
unit records the day and time of each
message. Make sure the date and
time have been set correctly (page
17).
Memory capacity
The total recording capacity (including
your greeting message) is about 17
minutes. A maximum of 64 messages
can be recorded.
Note:
L If message memory becomes full:
– "Answer Sys. Full" is shown
on the handset display.
– the answer on indicator on the base
unit flashes rapidly when the
answering system is turned on.
L When the message memory becomes
full:
– If you use the pre-recorded greeting
message, the unit automatically
switches to another pre-recorded
greeting message asking callers to
call again later.
Answering System
– If you recorded your own greeting
message, the same message is still
announced to callers even though
their messages are not recorded.
Turning the answering
system on/off
The answering system is preset to on.
Base unit
Press {s} to turn on/off the answering
system.
L When the answering system is turned
on, the answer on indicator lights up.
Handset
1
K (middle soft key)
2
{V}/{^}: "Answer System" i
M
3
{V}/{^}: Select "Answer On" or
"Answer Off". i M i
{ih}
Note:
L When the answering system is turned
on, u is displayed next to the battery
icon.
Call screening
While a caller is leaving a message, you
can listen to the message being
recorded through both the handset and
base unit's speaker. To adjust speaker
volume, press {^} or {V} repeatedly. You
can answer the call by pressing {C} on
the handset or {s} on the base unit. Call
screening can be set for each handset
and/or base unit.
Note:
L To turn this feature on/off, see page
43.
37
Advertisement
Table of Contents
