Table of Contents
Advertisement
TG7331-7341FX(e-e).book Page 24 Monday, July 28, 2008 8:57 AM
Base unit speed dial
Base unit speed dial
You can assign one phone number to
each of the 10 dial keys ({0} – {9}) on
the base unit.
Adding phone numbers to
speed dial
Important:
L Before adding phone numbers, make
sure the base unit is not in use.
1
{l}
L The in use indicator flashes.
2
Enter the phone number (24 digits
max.).
L If a pause is required for dialling,
press {P} where needed (page
18).
L If you enter incorrectly, continue
and finish step 4, then start again
from step 1.
3
{l}
4
Press a dial key ({0} – {9}).
L A long beep is heard and the in
use indicator stops flashing.
Note:
L If a phone number is assigned to a dial
key which already contains a phone
number, the old number will be
erased.
L We recommend you make a note of
which phone numbers are stored in
which dial keys.
To erase a stored phone number
1
{l} 2 times
2
Press the desired dial key ({0} –
{9}).
24
Making a call using the speed
dial keys
1
{s} i {l}
2
Press the desired dial key ({0} –
{9}).
Note:
L Speed dial numbers can only be
dialled from the base unit.
Advertisement
Table of Contents
