7
1
2
3
6
1
2
1
2
3
1
2
5
1
6
7
For Australia and New Zealand
30
RQT4708
2
3
For others
Using the timer
Using the record timer
2
Select this timer when you want to use the timer to record a midnight
program or while you are out.
Preparations
3
•
Make sure that you have completed "Setting the time" on page 11.
•
Switch on the system.
The figure shows how to set the record timer for recording FM
broadcasts from 18:30 to 20:00.
5
Press [CLOCK/TIMER] to select "rREC".
Every time you press the button:
CLOCK
Previous display
"ON" time setting
(Within 8 seconds or so)
1 Press [3] or [4] to select the starting time.
2 Press [CLOCK/TIMER].
"OFF" time setting
1 Press [3] or [4] to select the ending time.
2 Press [CLOCK/TIMER].
Source selection
Select the desired source and then prepare for
recording.
To record from the radio
Press [TUNER] to select the band and tune in the desired
station.
To record from a unit connected to the "AUX" terminals
Press [AUX].
Prepare for recording.
1 Insert a tape into deck 2 with the side on which the recording
will start facing you.
2
Except for SC-AK17 model and SC-AK27 Australia and New
Zealand model
Select [DOLBY NR].
3 Select the reverse mode.
Note
Dolby NR and reverse mode do not become part of the timer
memory.
Press [rPLAY/rREC] to select "rREC".
Every time you press the button:
PLAY
(OFF)
[rPLAY/rREC] indicator lights up.
Press [f/I] to put the unit on standby at least 2 min-
utes before your timer starting time.
About 30 seconds before the set time, the recording will start
with all sound muted automatically.
PLAY
REC
REC