Selecting The Number Of Rings - Panasonic KX-TCD510AL Operating Instructions Manual

Answering System

Selecting the Number of Rings

You can select the number of times the unit rings before the answering system answers
a call, from 2 to 7 or Auto (for Toll Saver; as shown below).
Toll Saver (When set to " Auto ")
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 5th ring, there are no new messages.
Hang up when you hear the 4th ring. This will save you the toll charge for the call.
1
Press JOYSTICK
(or move).
4
Select "Number of
Rings".
• The factory preset is "4 Rings".
64
2
Select "
TAM
Operation".
5
Select "Auto" or "2 Rings" to "7 Rings" to select the
number of rings.
3
Select "Setting TAM".