Answering System
Answering System Direct Command
You can operate the answering system by pressing dialling buttons as direct
command.
1
Press JOYSTICK
(or move).
Follow steps 1 to 3 shown above, then:
Press
1
Press
2
Press
Press
4 4
Press
5
Follow steps 1 to 2 shown above, then:
Press
Press
4 4
Press
5
Press
6 6
Press
7 7
4 4
Press
7 7
6 6
Press
8 8
Press
Press
0 0
Press
6 6
*1 This function is available only during an incoming/memo message playback.
68
2
Select "
TAM
Operation".
To repeat a message.
To skip a message.
To stop a message playback.
To delete one incoming/memo message. *1
To delete all incoming/memo messages.
To enter the answering system setting menu.
To playback new incoming/memo message(s).
To playback all incoming/memo messages.
To playback a greeting message.
To record a memo message.
To record your own greeting message.
To set the answering system ON.
To stop playing back or recording a message.
To set the answering system OFF.
To delete your own recorded greeting message.
3
Select "Play New Msg."
or "Play All Msg."