Intercom Between Handsets - Panasonic KX-TCD510AL Operating Instructions Manual

Multi-Unit User Operations
Base Unit Selection
When "Auto" (Automatic Base Unit Selection) is selected, the handset automatically
searches for other registered base units if you move outside of the radio range of the
current base unit.
When a specified base unit is selected, the handset will access that base unit only.
Calls (both incoming and outgoing) can be conducted only via the selected base unit,
even if the radio cells overlap with neighbouring base units.
To exit the operation, press
1
Press JOYSTICK (or move).
3
Select "Select Base".

Intercom Between Handsets

You can use your handsets as a 2-way intercom.
Intercom calls can be conducted within the radio cell of the current base unit, but
not with units in neighbouring radio cells.
To exit the operation, press
For example, when Handset 1 calls Handset 2:
<Handset 1>
1
Press INTERCOM
desired handset number
2
• You can also answer a call by pressing
pressing (Any Key Talk).
Terminating a Call
<Handset 1 or 2>
54
at any time.
2
4
at any time.
<Handset 2>
, then press the
.
Press TALK
,
3
Press TALK OFF
Select "
Setting Handset".
Select "Auto" or desired base unit.
.
to , , or
.
instead of