Panasonic KX-TCD510AL Operating Instructions Manual page 52

Multi-Unit User Operations
Handset Registration to a Base Unit
The handset supplied with the base unit is already registered. If an optional handset is
purchased, it must be registered as follows.
Charge the optional handset batteries for 7 hours before initial use.
Handset registration must be completed within 1 minute after pressing
over 1 minute, press
To exit the operation, press
1
Press JOYSTICK
(or move).
4
Select "Register
H/set".
6
Select the desired
base unit.
When a handset is registered successfully, a confirmation tone sounds and the "
icon is displayed.
• If you enter the incorrect Base Unit PIN, the error tone sounds and repeat from step 1.
• The handset main menu may change corresponding to the base unit registered to.
52
then start over again.
at any time.
2
Select "
Setting
Handset".
5
Press and hold
seconds) until the tone sounds.
•
If all registered handset(s) start ringing (paging), press
to stop paging then start over again.
7
Enter 4-digit Base Unit
PIN.
(Factory Preset 0000)
3
Select
"Registration".
on the Base Unit (for about 3
8
Press JOYSTICK.
. If
"