Using The Belt Clip; Optional Headset; Wall Mounting - Panasonic KX-TCD510AL Operating Instructions Manual

Plugging an optional headset into the handset allows hands-free phone
conversations. Please use only the Panasonic KX-TCA88AL headset. While using
the headset, speakerphone is not available. To switch to speakerphone, disconnect
the headset.
Hooks
Fasten the AC adaptor cord to
prevent it from being disconnected.
Wall Template
To remove
the belt clip.
Headset Jack
8 cm
Screws
8 cm

Using the Belt Clip

You can hang the handset on your belt
or pocket using the belt clip.

Optional Headset

Connecting the Optional
Headset to the Handset
Open the headset jack
cover, and connect the
optional headset to the
headset jack as shown.

Wall Mounting

This unit can be mounted on a wall.
- Insert screws into the wall. The
centre of the screw holes should be
8 cm horizontally apart.
- Connect the AC adaptor and the
telephone line cord.
- Arrange the wires as shown, then
mount the unit.
• Make sure the screws are securely
fastened to the wall.
73