Erasing Recorded Messages - Panasonic KX-FT988FX Operating Instructions Manual

7. Answering Machine (KX-FT988 only)
Example:
{STOP} {PLAYBACK}
{ERASE}
{A}{B}{<}{>}
Press {PLAYBACK}.
L Only new messages will be played.
L Adjust the speaker volume using {A} or {B}.
L After playing back all of the new messages;
j the {AUTO ANSWER} indicator will stop flashing
but will remain lit up when the auto answer setting
is turned ON.
j the total number of recorded messages will stop
flashing and remain displayed.
If you press {PLAYBACK} at this time, all
recorded messages will be played.
Note:
L The total recording time of all messages (greeting and
incoming) is about 12 minutes. A maximum of 59
messages can be recorded. If messages are
recorded in noisy environment, the actual recording
time may be less.
To repeat a message
Press {<} while listening to the message.
L If you press {<} within 5 seconds of the beginning of
the message, the previous message will be played.
L To play back a specific message, press {<} or {>}
and search for the message you want to listen to.
To skip a message
Press {>} to play the next message.
To stop playback
Press {STOP} 2 times.
30

7.3.1 Erasing recorded messages

To erase a specific message
02
Press {ERASE} while listening to the message you want
to erase.
To erase all messages
1
Press {ERASE} while the unit is idle.
2
Press {SET}.
L To cancel erasing, press {STOP}.
3
Press {SET}.
{SET}