Setup - Samsung SCD-2081 User Manual

setup


MOTION DET
1 If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
'
MOTION DET
2 Set it to 'ON' by using the Function
Setup switch.
- DETECT BOX : Outlines an object on the screen in a box when its
ALARM OUT : Releases a signal from the MD Output Terminal of the
-
- DETECT AREA : Defines the Motion
Detection area.
- MASK AREA : Specify a detection
▶AREA : You can select up to 4 areas.
▶MODE : Determines whether to use the
area selected in the AREA.
TOP / BOTTOM / LEFT / RIGHT :
▶
Adjust the size and position of the
selected area.
U R N
▶RET
- SENSITIVITY : Set the sensitivity of the motion detection. When adjusting
- DET. SIZE : Selects an object size to detect on the screen. When adjusting
- RETURN :
30_ setup
: Commands the camera to motion-detect and trace an object.
'.
movement matches a custom Motion Type.
camera when an object's movement matches a custom
Motion Type.
exception area to mask.
Select a mask area
number and specify the
size and position.
: S e e l t c h t s i o t a s e v
the MOTION DET menu.
the sensitivity, note that the lower the level means the higher
sensitivity.
the detection size, note that the higher the level means the bigger
detection size.
Select this to save the
the SPECIAL menu.
t e h M A S K A R E A m
menu settings and return to
MOTION DET
MOTION DET
1. DETECT BOX
▶
2. ALARM OUT
3. DETECT AREA
4. MASK AREA
5. SENSITIVITY
IIIIIIII  IIIIIIIIIIIII
6. DET.SIZE IIIIIIII  IIIIIIIIIIIII
7. RETURN
DETECT AREA
1. TOP
 IIIIIIIIIIIIIIIIIIIIIIIII
2. BOTTOM
IIIIIIIIIIIIIIIIIIIII 
3. LEFT
 IIIIIIIIIIIIIIIIIIIIIIIII
4. RIGHT
IIIIIIIIIIIIIIIIIIIII 
5. RETURN
MASK AREA
▶1. AREA
2. MODE
3. TOP
IIIII  IIIIIIIIIIIIIIIIIIII
4. BOTTOM
IIIIIII  IIIIIIIIIIIIIIIII
5. LEFT
 IIIIIIIIIIIIIIIIIIIIIIIII
6. RIGHT
IIIIIII  IIIIIIIIIIIIIIIII
7. RETURN
n e u s t e n i t s g n a d e r
ON
OFF
3
3
1
50
1
50
AREA1
OFF
30
110
25
110
u t n r o t