eXpOsURe
1.
When the SETUP menu screen is displayed,
select EXPOSURE by using the Function
Setup switch so that the arrow indicates
'EXPOSURE'.
Select a desired mode using the Function
2.
Setup switch.
bRIGHTNess : Adjusts the video brightness.
sHUTTeR : You can select shutter mode.
-
ESC : Select this to control the shutter
speed automatically. If ESC is
selected, the shutter speed is
automatically controlled depend-
ing on the ambient illumination
of the subject.
MANUAL : You can control shutter speed manually.
-
(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)
A.FLK : Select this when you experience picture flicker, this happens when
-
there is a clash with the installed lighting frequency.
-
---: Shutter speed is fixed at 1/60sec(1/50sec).
When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may
become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing
the installation position.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
Set the shutter mode to --- if color rolling occurs.
AGC (AUTO GAIN CONTROl) : The higher the gain level, the brighter the screen
-
OFF : Deactivates the AGC function.
LOW : Allows automatic gain control from 5.3dB to 32dB.
-
-
HIGH : Allows automatic gain control from 5.3dB to 37dB.
seNs-Up : When it is night or dark, the
camera automatically detects the
light level and maintains a clear
picture if this mode is activated.
-
OFF : Deactivates the SENS-UP function.
-
AUTO : Activates the SENS-UP function.
1.LENS
▶ 2.EXPOSURE
3. SSDR
▶ 1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
but the higher the noise.
▶ AUTO
MAIN SETUP
DC
OFF
EXPOSURE SETUP
IIIII IIIIIIIIIIIIIIII
25
---
HIGH
OFF
LIMIT
x2
Press SET to Return
English_21