Installation - Samsung SCD-2081 User Manual

installation

INSTALLATION
1. Separate the dome cover by turning anti-clockwise.
2. Separate the shield case by pulling from the camera body.

The installation should be done by qualifi ed
service personnel or system installers.

If the ceiling material is not strong enough to
hold the installation screws, the camera may
fall off. Reinforce the ceiling as needed.

To change the position of the cable, take away
the Hole Cover and pass the cable through.
Latch
Locking direction
[Figure-1]
Unlocking direction
(Anti-clockwise)
* To install the dome cover on the camera
body, turn the latches in locking direction as
shown in the [Figure-1].
Main Body
(Camera)
Shield Case
Locking direction
(Clockwise)
Dome cover
Original position of
the cable
Hole Cover
English_13