Samsung SCD-2081 User Manual page 16

installation
ADJUST THE PANNING, TILTING & ROTATION WHILE WATCHING THE MONITOR
Pan Base
1. You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism.
Pan Base moves by 176˚ to each side direction and 352˚ on the whole.

Tilt Base covers total 73˚ angle(0˚ ~ 73˚).

Rotate Base moves by 174° to each side direction and 348° on the whole.

Methods of adjustment
2.
The case of wall installation

➊ After mounting the camera on a wall, adjust the panning angle so that the
correct viewing angle is attained and the titling is correctly orientated.
➋ And then adjust the tilting angle by rotating the tilt base.
➌ Loosen the rotate base hold screw and adjust rotate base for the best view
➍ Tighten rotate base securing screw.
The case of ceiling installation

➊ After mounting the camera on a ceiling, adjusting the panning angle to the
correct viewing position by rotating the pan base.
A d n
➋
➌ Loosen the rotate base hold screw and adjust rotate base for the best view
➍ Tighten pan and tilt securing screw.
When you want to adjust the Pan/Tilt/Rotate Base, loosen, adjust and then tighten the Pan/Tilt/
Rotate Base screws.
1_ installation
174˚
176˚
176˚
h t n e a j d s u t t e h i t l i t g n
174˚
a g n e l y b o r a t n i t t g e h
73˚
Rotate Base
Tilt Base
t l i t b s a . e