Samsung SCD-2081 User Manual page 14

installation
WHeN UsING THe CeIlING bRACkeT
M4 tapping
screw (provided)
CAMERA
Dome cover
1. Hold down the lock lever on the bottom of the camera in the UNLOCK position
and turn it counter clockwise with the other hand to remove the ceiling bracket
from the main body.
2. Place the separated ceiling bracket so that the "Front" side faces the area to be
monitored and install it with the M4 tapping screws.
3. To combine the main body with the ceiling bracket, make sure that the Pan
Base fi xing screw face the opposite side of the "Front" side of the ceiling
bracket and rotate it clockwise.
4. Adjust the camera lens to face the area to be monitored and fi x the main body
and the dome cover by aligning the grooves and rotating the body clockwise.
1_ installation
Ceiling bracket
An arrow for installing
Unlocking
direction
Lock Lever
directions
Locking
direction