setup
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras, by
adopting a proprietary SV-V DSP chip.
1.
When the SETUP menu screen is displayed,
select 'BACKLIGHT' by using the Function
Setup switch so that the arrow indicates
BACKLIGHT .
2.
Select a desired mode using the Function Setup
switch depending on the camera purpose.
UseR blC : Enables a user to directly
-
LEVEL : Adjust level of the BLC function.
-
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HlC (High light Compensation) :
This function masks the strong light to
minimize white out due to over exposure and
preserve much of the on-screen details when
the camera aims a strong light source.
LEVEL : Adjusts the brightness level of a
-
-
LIMIT : Enable to change the operating
-
MASK COLOR/TONE :
Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta)
TOP/BOTTOM/LEFT/RIGHT :
-
Adjust the area to be enhanced.
Off : Not being used
2_ setup
select a desired area from a
picture, and to view the area
more clearly.
monitoring area.
condition.
MAIN SETUP
1.LENS
2.EXPOSURE
3.
SSDR
WHITE BAL
4.
BACKLIGHT
5.
▶
BLC SETUP
▶ 1.LEVEL
2.TOP
IIIII IIIIIIIIIIIIIIII
3.BOTTOM
IIIIIIIIIIIIIIIIII III
4.LEFT
IIIIII IIIIIIIIIIIIIII
5. RIGHT
IIIIIIIIIIIIIIII IIIII
6. RETURN
HLC SETUP
▶ 1. LEVEL
2. LIMIT
3. MASK COLOR
4. MASK TONE
III IIIIIIIIIIIIIIIIII
5.TOP
IIIIIIIIIIIIIIIIIIIII
6.BOTTOM
IIIIIIIIIIIIIIIIIIIII
7.LEFT
IIIIIIIIIIIIIIIIIIIII
8.RIGHT
IIIIIIIIIIIIIIIIIIIII
9. RETURN
DC
OFF
ATW
OFF
MIDDLE
25
90
70
150
MIDDLE
NIGHT ONLY
BLACK
5
10
105
10
210