Running In - BMW K1600GTL Rider's Manual

Phase 2
5
Test of the diagnosis-compat-
ible system components while
92
the motorcycle is on the move.
The engine must be running
and the motorcycle must reach
a speed of at least 5 km/h in
order for DTC self-diagnosis to
complete.
DTC warning light slow-
z
flashes.
DTC self-diagnosis
completed
The DTC symbol no longer
shows.
If an indicator showing a DTC
fault appears after DTC self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that the DTC function
is not available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.

Running in

Engine
Until the first running-in check,
vary the throttle opening and
engine-speed range frequently;
avoid riding at constant engine
rpm for prolonged periods.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads, avoid-
ing high-speed main roads and
highways if possible.
Comply with the rpm limits for

running in.

Running-in speed
-1
<5000 min (Odometer read-
ing 0...300 km)
-1
<6000 min (Odometer read-
ing 300...1000 km)
Running-in speed
no full throttle (Odometer
reading 0...1000 km)
Do not omit the first running-in
check after 500 - 1200 km.
Brake pads
New brake pads have to bed
down before they can achieve
their optimum friction levels. You
can compensate for this initial re-
duction in braking efficiency by
exerting greater pressure on the
levers.
New brake pads can extend
stopping distance by a sig-
nificant margin.
Apply the brakes in good time.