BMW K1600GTL Rider's Manual page 134

8
132
Unclip retaining clip 1 holding
the sensor cable to the brake
line.
Remove cable tie 2.
z
Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disc on reas-
sembly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove screws 3 of the brake
calipers on left and right.
Force the brake pads 4 slightly
apart by rocking brake caliper 5
back and forth against brake
disc 6.
Carefully pull the brake calipers
back and out until clear of the
brake discs.