EFORE EGIN What is included COLORcontroller™ 2.0 1 x LED-CHVA COLORcontroller™ 2.0 1 x LED-SIG15A Signal Extension Cable 1 x AC-DC Power Adapter Manual and Warranty Card Unpacking Instructions Immediately upon receiving a product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition.
Selection of preset color combinations Features 1000 tubes 30 varied patterns (with color changes) Built in Microphone Digial LCD display DMX Channel Summary HANNEL Color, Programs, Auto Color Combinations LED-CHVA User Manual UNCTION Speed Flash 2005-10-10/16:02...
2-pin and the other a 4-pin. Connect each tube in series by each matching connector and plug. The 2-pin connector is used for power. The 4-pin connector is used for signal. For every 30 tubes connected you will need a signal booster (LED-BOOSTA) and a power connection (LED-PC5A) to a different AC outlet. LED-CHVA User Manual SEGMENT BUTTONS UTTONS Mode...
2. Press the SETUP button then the UP button twice. It will show “2 Set Address”. 3. Press the SETUP button to re-initialize. 4. Proceed to prior instruction “Initial Setup” and re-do. LED-CHVA User Manual [MODE] Returns to Main menu or step backward through functions [SET UP] Enters menu selection...
SETUP will toggle the various options while UP and DOWN changes the values. 7. Press the MENU button to retain the new settings.. 8. Press MENU again if necessary to return to the Main Menu. LED-CHVA User Manual ODIFICATIONS ODIFIER...
With exception to the system setup process all control functions on the controller can be accessed and executed externally via a Universal DMX controller. First you must connect the LED-CHVA controller to an existing DMX daisy chain. The controller is addressable just like any other DMX device or fixture and it will be controlled as if it were a fixture in most intelligent light consoles.
XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). CHAUVET carries 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’)
Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.
Power Extension 15’ ... LED-EXTP15A Power Extension 5’ ... LED-EXTP5A Power Cable (Direct to Outlet)... LED-PC5A Signal Cable Extension 15’... LED-SIG15A Signal Cable Extension 5’ ... LED-SIG5A Signal Booster...LED-BOOSTA COLORcontroller™ 2.0 ...LED-CHVA COLORtube™ 2.0 LED Tube ... LED-T40A Technical Support Address: Support (Email): Telephone: Fax: Website:...