Restore The Factory Settings (Without Safety Functions) - Siemens SINAMICS G120C Operating Instructions Manual

Low voltage inverter

Hide thumbs Also See for SINAMICS G120C:

Table of Contents

Restore the factory settings (without safety functions)

Restore the factory inverter settings

Procedure with STARTER

Proceed as follows to reset the inverter to factory settings:

1. Select your drive.

2. Go online.

3. Open "Drive Navigator".

4. Select the "Commissioning" button.

5. Press the "Factory setting" button.

6. ☑ In the screen form, select "After loading copy RAM to ROM".

7. Start the reset.

8. Wait until the inverter has been reset to the factory setting.

You have reset the inverter to factory settings.

SINAMICS G120C converter

Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC

Commissioning

5.5 Restoring the factory setting

Sinamics g120c