Image Processor Board - Xerox phaser 6250 Service Manual

Image Processor Board

The components identified in the following figure need to be transferred from the old
board to the new board when installing a new Image Processor Board in the printer.
Data stored in the NVRAM can be transferred to the new board using the MCU
NVRAM Store/Restore functions instead of by moving the component. Detailed
information on the Store/Restore functions is available in "Service Diagnostic Tests"
on page 3-9.
2
1. Hard Drive (available option)
2. Configuration Chip
1-8
1 3
Phaser 6250 Color Laser Printer Service Manual
pin 1
4
3. NVRAM
4. Memory (RAM) DIMM 1 and DIMM 2
(available option)
6250-023