Damage caused by automatically printing specialty media using the duplex unit is not covered under the Xerox warranty, service agreement, or Total Satisfaction Guarantee. For best results with automatic 2-sided printing, do not use heavy toner coverage on the even- numbered pages of your print job.
The following graphic displays the printer’s paper path: Binding Preferences Use the printer driver to select Portrait or Landscape orientation for the images on the page. When you print 2-sided jobs, select the binding preference which determines how the pages turn.
Page 3
■ Select the orientation. ■ Select 2-sided printing as described in the table below. Click OK to accept the printer driver settings, then click OK to print. Setting the Printer Driver for 2-Sided Printing Operating System Steps Windows 98 or Select File, then select Print.
Manual 2-Sided Printing Guidelines If the printer does not have automatic 2-sided printing capability, or you want to print on a paper type that cannot be automatically printed on two sides, print manually on both sides of the paper by following the procedures in this section.
Place the side to be printed facedown with the top of the page entering the printer first. If using paper with pre-punched holes, place the holes toward the right side of the tray when you are facing the front panel.
Page 6
In the printer driver, select Tray 1 (MPT) as the paper source. Send the job to the printer so that the even-numbered pages (side 2) are printed. Manual 2-Sided Printing Using Trays 2-4 Printing Side 1 Insert paper into the tray. Place the side to be printed faceup with the top of the page at the front of the tray.