Troubleshooting; Display Codes - Invacare Reliant 450 RHL450-1 User Manual

11 ACCESSORIES

11.5 Troubleshooting

SYMPTON
Unit does NOT work properly.
Battery has been replaced and unit still does
NOT work properly.

Display Codes

CALIBRATION REQUIRED - Indicates improper stored calibration data, calibration is necessary.
CAL
OVER CAPACITY - Indicates a weight exceeding the capacity has been loaded on the scale.
OCAP
Manual/Electric Portable Patient Lift
PROBABLE CAUSE
Battery failure.
58
SOLUTIONS
Check battery. Replace if necessary.
Contact Invacare for Service at 1-800-333-6900
Part No. 1078987