Logging On Remote Con; Trol; Logging On Remote Control - BMW R nineT 2015 Rider's Manual

Step 2:
This step is not assigned any
function.
Press button 1 or button 2.
Step 3: Which alarm tone is to
be selected?
Rising and falling:
Press button 1.
Intermittent:
Press button 2.
Step 4: Is the alarm function
to be automatically activated
after the ignition is switched
off?
yes:
Press button 1.
no:
Press button 2.
When is the programming
canceled?
Programming is canceled
by switching off the ignition
before the last programming
step.
or automatically if more than
30 seconds pass between 2
programming steps.
The data are not saved when
programming is canceled.
Save programming
Programming is saved
by switching off the ignition af-
ter the last programming step.
or automatically 30 seconds
after the last programming
step.
The DWA indicator lamp stops
flashing and 4 acknowledgment
tones sound.
Logging on remote
control
with anti-theft alarm system
OE
(DWA)
When is it necessary to
log on a remote control?
Should you log on an additional
remote control or want to replace
a lost remote control, then you
must always log on all remote
controls with the DWA. You can
log on a maximum of 4 remote
controls.
5
49
z