Table of Contents
Advertisement
Chapter 7 Menu description tables
7-8-6 MIC/AUDIO2
Item/
Variable
Data storage
range
FRONT MIC
ON
For selecting the phantom power supply for
POWER
OFF
the front microphone.
C U F
REAR MIC POWER ON
For selecting the phantom power supply for
OFF
the rear microphone.
C U F
AUDIO OUT
ON
For setting the audio output circuit.
OFF
OFF: The power to the output circuit is shut
ON: The signals of the audio output circuit
C U F
MONITOR SELECT
STEREO
For selecting the format of the signals to be
MIX
output to the monitor.
SDC905
C U F
FRONT MIC LEVEL –40dB
For selecting the input level of the front
–50dB
microphone.
C U F
REAR MIC CH1
–50dB
For selecting the input level of the rear
LVL
–60dB
microphone.
C U F
REAR MIC CH2
–50dB
For selecting the input level of the rear
LVL
–60dB
microphone.
C U F
REAR LINE IN LVL
0dB
For selecting the rear line input level.
+4dB
C U F
AUDIO OUT LVL
0dB
For selecting the rear audio output level.
+4dB
C U F
HEADROOM
18dB
For setting the headroom (reference level).
20dB
C U F
WIRELESS WARN
ON
For selecting whether or not to output
OFF
warnings when the reception of the wireless
receiver is poor.
C U F
The underlining in the variable range column indicates the setting in the preset mode.
Remarks
down, and the signals of the circuit are
not output.
are output.
7-8-7 TC/UB
Item/
Variable
Data storage
range
UB MODE
USER
For selecting the UB mode.
TIME
USER:
DATE
Selects the UB value set in the LCD
EXT
section.
TCG
TIME:
FRM RATE
Selects the local time (hour, minute,
REGEN
second).
DATE:
Selects the local date and time (last 2 digits
of year, month, date, hour)
EXT:
When CAM or VIDEO is selected as the
REC SIGNAL menu item setting on the
<SYSTEM MODE> screen, the user bits of
the signal supplied to the TC IN connector
are used as the reference.
When 1394 is selected, user bits of the
signal supplied to the DVCPRO connector
are used as reference.
If the user bits cannot be read, the user bits
which are set in the unit are retained.
TCG:
Inputs the TCG value unchanged.
FRM RATE:
Selects the same camera shooting data
(frame rate, etc.) as the VAUX UB (VITC
UB).
REGEN:
Reads the value recorded on the tape and
then continues to record from that value.
C U F
VITC UB MODE
USER/EXT
For selecting the VAUX TC (VITC) UB mode.
TIME
USER/EXT:
DATE
TCG
FRM RATE
REGEN
TIME: The local time (in hours, minutes and
DATE: The local date (last 2 digits of AD
TCG:
FRM RATE:
REGEN: The value recorded on the tape is
C U F
Remarks
When EXT is selected as the UB MODE
setting, the value concerned applies; with
any other setting, the USER value set by
UB is recorded.
seconds) is selected.
year, month, day and hours) is
selected.
The TCG value is used as is for UB.
The same shooting information (frame
rate, etc.) of the camera as for VAUX UB
(VITC UB) is selected.
read and recorded continuously.
103
7
Hide quick links:
Advertisement
Table of Contents
