Table of Contents
Advertisement
Chapter 7 Menu description tables
7-8-5 MIC/AUDIO1
Item/
Variable
Data storage
range
FRONT VR CH1
FRONT
For setting whether or not to make the audio
W.L.
control operational for the input system
REAR
selected for CH1.
ALL
C U F
OFF
FRONT VR CH2
FRONT
For setting whether or not to make the audio
W.L.
control operational for the input system
REAR
selected for CH2.
ALL
C U F
OFF
MIC LOWCUT CH1
FRONT
For selecting the microphone low-cut filter for
REAR
CH1.
W.L.
OFF
C U F
MIC LOWCUT CH2
FRONT
For selecting the microphone low-cut filter for
REAR
CH2.
W.L.
OFF
C U F
MIC LOWCUT CH3
FRONT
For selecting the microphone low-cut filter for
REAR
CH3.
W.L.
OFF
C U F
MIC LOWCUT CH4
FRONT
For selecting the microphone low-cut filter for
REAR
CH4.
W.L.
OFF
C U F
LIMITER CH1
ON
For selecting the limiter for CH1.
C U F
OFF
LIMITER CH2
ON
For selecting the limiter for CH2.
C U F
OFF
AUTO LEVEL CH3
ON
For selecting the method used to set the level.
OFF
C U F
AUTO LEVEL CH4
ON
For selecting the method used to set the level.
OFF
C U F
REC CH3/CH4
SW
For selecting the signals to be recorded for
CH1/2
CH3 and CH4.
SW:
CH1&2: The same signals for CH1 and CH2
C U F
CUE REC SELECT
CH1
For selecting the signals to be recorded for
CH2
the CUE channel.
CH1+CH2
C U F
TEST TONE
NORMAL
For selecting the test signal.
ALWAYS
NORMAL: The test tone signal is output to all
OFF
CHSEL
ALWAYS: The test tone signal is always output
OFF:
CHSEL: The test tone signal is output to the
C U F
Remarks
The signals complying with the
position of the CH3/CH4 selector
switch on the side panel are recorded.
are recorded for CH3 and CH4. The
CH3&4 input circuit is set to the
power-saving mode.
the channels when the CAM/BAR
switch has been set to BAR and the
CH1 AUDIO IN switch has been set
to FRONT.
to all the channels when the CAM/
BAR switch has been set to BAR.
The test tone signal is not output.
channels for which the CH1 or CH2
AUDIO IN switch has been set to
FRONT when the CAM/BAR switch
is set to BAR. It is not output to CH3
or CH4.
7-8-6 MIC/AUDIO2
Item/
Variable
Data storage
range
FRONT MIC
ON
For selecting the phantom power supply for
POWER
OFF
the front microphone.
C U F
REAR MIC POWER ON
For selecting the phantom power supply for
OFF
the rear microphone.
C U F
AUDIO OUT
ON
For setting the audio output circuit.
OFF
OFF: The power to the output circuit is shut
ON: The signals of the audio output circuit
C U F
MONITOR SELECT STEREO
For selecting the format of the signals to be
MIX
output to the monitor.
C U F
FRONT MIC LEVEL –40dB
For selecting the input level of the front
–50dB
microphone.
C U F
REAR MIC CH1
–50dB
For selecting the input level of the rear
LVL
–60dB
microphone.
C U F
REAR MIC CH2
–50dB
For selecting the input level of the rear
LVL
–60dB
microphone.
C U F
REAR LINE IN LVL
0dB
For selecting the rear line input level.
+4dB
C U F
AUDIO OUT LVL
0dB
For selecting the rear audio output level.
+4dB
C U F
HEADROOM
18dB
For setting the headroom (reference level).
20dB
C U F
WIRELESS WARN
ON
For selecting whether or not to output
OFF
warnings when the reception of the wireless
receiver is poor.
C U F
Remarks
down, and the signals of the circuit are
not output.
are output.
97
7
Advertisement
Table of Contents
