Table of Contents
Advertisement
Chapter 5 Preparation
5-4 Audio input signal preparations
Prepare to connect the audio components which will supply
the audio signals to the unit.
5-4-1 When using the front microphone
The microphone of the AJ-MC700P mic kit (optional
accessory) can be attached to the viewfinder.
1
Open the mic holder.
2
Attach the microphone, and tighten the locking screw.
Locking
screw
3
Connect the microphone's connecting cable to the MIC IN
jack on the camera.
MIC IN jack
4
Set the AUDIO IN switch or switches to "FRONT" in
accordance with the audio channel or channels whose
sound is to be recorded.
5-4-2 When using an external microphone
First attach the AJ-MH700P mic holder (optional accessory).
1
2
3
4
5
AUDIO IN
switches
Remove the screws used to attach the mic holder.
Attach the mic holder to the main unit using the screws
provided with the AJ-MH700P mic holder.
Screws provided with mic holder
Attach the microphone to the mic holder, and tighten the
locking screw.
Connect the microphone's connecting cable to the MIC IN
jack on the camera.
Set the AUDIO IN switch or switches to "FRONT" in
accordance with the audio channel or channels whose
sound is to be recorded.
Locking screw
67
5
Hide quick links:
Advertisement
Table of Contents
