Mic/Audio1; Mic/Audio2 - Panasonic AJ-SPX800E Operating Instructions Manual

8-6-4

MIC/AUDIO1

Items/ Adjustable
Data Saved Range
FRONT VR CH1 FRONT Select whether or not to enable the FRONT
W.L. AUDIO LEVEL control for the signal selected
as the input signal to AUDIO CH1.
REAR
FRONT: Only enabled when FRONT is
ALL
OFF
W.L.: Only enabled when WIRELESS is
REAR:Only enabled when REAR is
ALL: Enabled for any input selected.
OFF: Disabled for any input selected.
– C U F –
FRONT VR CH2 FRONT Select whether or not to enable the FRONT
AUDIO LEVEL control for the signal selected
W.L.
as an input signal to AUDIO CH2.
REAR
FRONT: Only enabled when FRONT is
ALL
OFF
W.L.: Only enabled when WIRELESS is
REAR:Only enabled when REAR is
ALL: Enabled for any input selected.
OFF: Disabled for any input selected.
– C U F –
MIC LOWCUT FRONT Select the microphone low-cut filter.
CH1 REAR
W.L.
OFF
– C U F –
MIC LOWCUT FRONT Select the microphone low-cut filter.
CH2 REAR
W.L.
OFF
– C U F –
MIC LOWCUT FRONT Select the microphone low-cut filter.
CH3 REAR
W.L.
OFF
– C U F –
MIC LOWCUT FRONT Select the microphone low-cut filter.
CH4 REAR
W.L.
OFF
– C U F –
LIMITER CH1 ON Select the limiter.
OFF
– C U F –
LIMITER CH2 ON Select the limiter.
OFF
– C U F –
AUTO LEVEL ON Select the level setting method.
CH3 OFF
– C U F –
AUTO LEVEL ON Select the level setting method.
CH4 OFF
– C U F –
REC SW Select the signals to be recorded in CH3
and CH4.
CH3/CH4 CH1/2
SW:
CH1/2: Record same signals as CH1 and
– C U F –
25M REC CH 2CH Select the audio channels to be recorded in
the DVCPRO and DV formats.
SEL 4CH
2CH: Only recorded in CH1 and CH2.
4CH: Recorded in all channels from CH1
– C U F –
110
Remarks
selected.
selected.
selected.
Recording level does not change by
turning the volume control.
selected.
selected.
selected.
Recording level does not change by
turning the volume control.
According to camera's CH3 and CH4
selector switches.
CH2.
to CH4.
Items/ Adjustable
Data Saved Range
TEST TONE NORMAL Select the test signal.
NORMAL: Output test tones to CH1/2 when
ALWAYS
OFF
CHSEL
ALWAYS: Output test tones to CH1/2 when
OFF:
CHSEL:
– C U F –
8-6-5

MIC/AUDIO2

Items/ Adjustable
Data Saved Range
FRONT MIC ON Select the phantom power supply for the
front microphone.
POWER OFF
– C U F –
REAR MIC ON Select the phantom power supply for the
rear microphone.
POWER OFF
– C U F –
AUDIO OUT ON Set the audio output circuit.
OFF: Power-down output circuit to disable
OFF
ON:
– C U F –
MONITOR STEREO Select the signal format for the monitor
output.
SELECT MIX
– C U F –
FRONT MIC –40dB Select the front microphone input level.
LEVEL –50dB
– C U F –
REAR MIC CH1 –50dB Select the rear microphone input level.
LVL –60dB
– C U F –
REAR MIC CH2 –50dB Select the rear microphone input level.
LVL –60dB
– C U F –
REAR LINE IN 0dB Select the rear line input level.
LVL +4dB
– C U F –
AUDIO OUT LVL 0dB Select the audio output level.
+4dB
– C U F –
HEADROOM 18dB Set the headroom (standard level).
20dB
– C U F –
WIRELESS ON Select whether or not to enable the alarm to
trigger for poor wireless receiver reception.
WARN OFF
– C U F –
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks
the OUTPUT/AUTO KNEE
selector switch is set to BARS and
the AUDIO IN switch CH1 is set to
FRONT.
OUTPU/AUTO KNEE selector
switch is set to BARS.
Disable test tone output.
Output test tone to the channels
where the AUDIO IN switch CH1
or CH2 is set to FRONT when
OUTPUT/AUTO KNEE selector
switch is set to BARS. The test
tone is not output to CH3 and
CH4.
Remarks
output.
Enable output.