Table of Contents
Advertisement
Chapter 7 Menu description tables
7-4-3 USER BOX
Item/
Variable
Data storage
range
USER BOX
ON
For setting whether or not to display the user
OFF
box.
C U F E
USER BOX WIDTH
001
For setting the horizontal width of the user
:
box.
013
:
100
C U F E
USER BOX
001
For setting the vertical height of the user box.
:
HEIGHT
013
:
C U F E
121
USER BOX H POS
–50
For setting the horizontal position of the user
:
box center.
+00
:
+50
C U F E
USER BOX V POS
–50
For setting the vertical position of the user box
:
center.
+00
:
+50
C U F E
7-4-4 VF INDICATOR1
Item/
Variable
Data storage
range
EXTENDER
ON
For selecting ON or OFF for the extender
OFF
display.
C U F E
SHUTTER
ON
For selecting ON or OFF for the shutter speed
OFF
display.
C U F E
FILTER
ON
For selecting ON or OFF for the filter No.
OFF
display.
C U F E
WHITE
ON
For selecting ON or OFF for the AWB
OFF
PRE/A/B display.
C U F E
GAIN
ON
For selecting ON or OFF for the currently
OFF
selected gain, S.GAIN and DS.GAIN display.
C U F E
IRIS
OFF
OFF:
IRIS
S+IRIS
IRIS:
S
S+IRIS: Both the super iris ON status and
S:
(The display or non-display of the aperture
value and that of the iris override are linked.)
C U F E
CAMERA ID
BAR
For setting the ID configuration during
CAM
recording.
ALWAYS
BAR:
OFF
CAM:
ALWAYS: The ID is recorded at all times.
OFF:
<Note>
If ON is selected as the ID MIX INH menu
item setting on the "7-9-1 OPTION" screen, it
is not possible to record the camera ID when
the images of the camera are to be recorded
even if CAM or ALWAYS is selected as this
menu item's setting.
C U F E
The underlining in the variable range column indicates the setting in the preset mode.
Remarks
Remarks
Neither the super iris ON status nor
the aperture value is displayed.
Only the aperture value is displayed.
aperture value are displayed.
The super iris ON status is displayed.
The ID is recorded when color bar
signals are provided.
The ID is recorded when the camera
images are provided.
The ID is not recorded at any time.
Item/
Variable
Data storage
range
ID POSITION
UPPER R
For setting the location where the camera ID
UPPER L
is to be recorded.
LOWER R
UPPER R: Top right
LOWER L
UPPER L: Top left
LOWER R: Bottom right
LOWER L: Bottom left
C U F E
DATE/TIME
ON
For specifying whether or not the date and
OFF
time are mixed simultaneously when the
CAMERA ID is recorded.
C U F E
ZOOM LVL
ON
For selecting ON or OFF for the zoom
OFF
position display.
C U F E
COLOR TEMP
ON
For selecting ON or OFF for the color
OFF
temperature display.
C U F E
7-4-5 VF INDICATOR2
Item/
Variable
Data storage
range
TAPE
ON
For selecting ON or OFF for the remaining
OFF
tape amount display.
C U F E
BATTERY
ON
For selecting ON or OFF for the battery
OFF
voltage display.
C U F E
AUDIO LVL
ON
For selecting ON or OFF for the audio level
OFF
meter display.
C U F E
TC
TCG
For selecting the time code which is to be
TCR
displayed.
TCG/TCR
TCG:
OFF
TCR:
TCG/TCR: The time code generator value is
OFF:
C U F E
VTR WARNING
ALWAYS
For selecting how VTR warnings are
NORMAL
displayed.
OFF
ALWAYS: It is displayed every time a warning
NORMAL: It is displayed for 3 seconds when a
OFF:
C U F E
SAVE LED
SAVE&
For setting the operation of the SAVE lamp.
TAPE
SAVE&TAPE:
SAVE
SAVE: The lamp lights up when the VTR
C U F E
Remarks
Remarks
The time code generator value is
displayed in the E-E mode.
The time code reader value is
displayed in the V-V mode.
displayed in the E-E mode, and the
time code reader value is displayed
in the V-V mode.
The time code is not displayed at
any time.
has occurred.
warning has occurred and also for 3
seconds after recording has started
and after recording has finished.
It is not displayed at any time.
The lamp lights up when the VTR
SAVE/STBY switch has been set to the
SAVE position. It is off during recording.
As the tape is approaching the end, it
starts flashing in tandem with the warning
alarm.
SAVE/STBY switch has been set to
the SAVE position. It is off during
recording.
7
85
Hide quick links:
Advertisement
Table of Contents
