Vf Marker; Vf User Box - Panasonic AJ-PX5000G Operating Instructions Manual

[VF MARKER]

Item
[TABLE] Selects the setting table of the marker select function. Check or set the details of
[A]/[B] at subsequent settings.
[A], [B]
[CENTER MARK] Controls the center mark.
[1]
[2]
[3]
[4]
[OFF]
[SAFETY MARK] Selects the type of frame for the safety zone marker.
[1]
[2]
[OFF]
[SAFETY AREA] Sets the size of the safety zone marker.
The constant ratio of length to width can be set in 1% increments.
[80%]...[90%]...[100%]
[FRAME MARK] Selects frame marker [ON]/[OFF].
[ON], [OFF]
[FRAME SIG] Sets frame marker aspect ratio.
The [VISTA] is 16:8,65 (1,85:1), and [CNSCO] is 16:6,81 (2,35:1).
[4:3], [13:9], [14:9], [VISTA], [CNSCO]
[FRAME LVL] Sets the level of the outside of the frame marker.
[0]
[1]...[14]
[15]

[VF USER BOX]

The user box can be displayed as a box-type cursor in any position.
Item
[USER BOX] Sets whether to display the user box in the viewfinder.
[ON], [OFF]
[USER BOX WIDTH] Sets the width of the user box.
[1]...[13]...[100]
[USER BOX HEIGHT] Sets the height of the user box.
[1]...[13]...[100]
[USER BOX H POS] Sets the horizontal position of the center of the user box.
[−50]...[0]...[50]
[USER BOX V POS] Sets the vertical position of the center of the user box.
[−50]...[0]...[50]
Chapter 7 Menu Operations — Menu list
[ON]
[109%]
[ZEBRA2 DETECT]
[ZEBRA1 DETECT]
[0%]
Description of settings
+ (large)
Open center (large)
+ (small)
Open center (small)
Does not display.
Box
Corners
Does not display.
Equivalent to signal off (blanking status).
Higher numbers indicate increased brightness.
Same brightness as center.
Description of settings
[ZEBRA2]
[OFF] [SPOT]
– 144 –
Remark
are factory settings.
Remark
are factory settings.