Chapter 5 Preparation
5-3 Audio input signal preparations
Prepare to connect the audio components which will supply
the audio signals to the unit.
5-3-1 When using the front microphone
The microphone of the AJ-MC700P mic kit (optional
accessory) can be attached to the viewfinder.
1
Open the mic holder.
2
Attach the microphone, and tighten the locking screw.
Locking
screw
3
Connect the microphone's connecting cable to the MIC IN
jack on the camera.
MIC IN jack
4
Set the AUDIO IN switch or switches to "FRONT" in
accordance with the audio channel or channels whose
sound is to be recorded.
64
AUDIO IN
switches
5-3-2 When using an external microphone
First attach the AJ-MH900 mic holder (optional accessory).
1
Remove the screws used to attach the mic holder.
2
Attach the mic holder to the main unit using the screws
provided with the AJ-MH900 mic holder.
Screws provided with mic holder
3
Attach the microphone to the mic holder, and tighten the
locking screw.
4
Connect the microphone's connecting cable to the MIC IN
jack on the camera.
5
Set the AUDIO IN switch or switches to "FRONT" in
accordance with the audio channel or channels whose
sound is to be recorded.
Locking screw