Table of Contents
Advertisement
Chapter 7 Menu description tables
7-2 SYSTEM SETTING
7-2-1 REC FUNCTION
Item/
Variable
Data storage
range
INTERVAL REC
ON
For setting the INTERVAL REC function.
MODE
ONE SHOT
ON: Interval recording is possible in single-
OFF
ONE SHOT:
Recording is performed only once for the
time set in the REC TIME item, after which
it stops.
OFF: Interval recording is not performed.
<Note>
The OFF setting is restored when the power
is turned off.
F
REC TIME
00s01f
For setting the recording time (one cut).
:
The shortest time is one frame.
59s29f
C U F
PAUSE TIME
00h00m00s01f
For setting the recording pause time.
:
The shortest time is one frame.
00h04m59s29f
:
C U F
23h59m59s29f
TAKE TOTAL TIME
NONE
For setting the time required for shooting.
:
Select a setting from NONE (shooting
5day
continues until it is stopped manually) to
5DAY (5 days).
C U F
TOTAL REC TIME
00m00s01f
For displaying the total recording time. The
:
setting for this time cannot be changed.
90m59s29f
The total time yielded by adding the REC
OVER 100min
TIME, PAUSE TIME and TOTAL TAKE TIME
NONE
is displayed.
AUDIO REC
OFF
For setting whether or not to record the
ON
sound.
C U F
START DELAY
0SEC
For setting the time taken until recording is to
:
start after the REC START button is pressed
10SEC
in the INTERVAL REC mode.
C U F
PRE REC MODE
OFF
For setting the PRE REC function.
0SEC
OFF:
:
10SEC
0-10SEC: The
C U F
RETAKE MODE
ON
For selecting whether or not to allow retake
OFF
operations (MODE CHECK switch + RET
switch).
<Note>
The OFF setting is restored when the power
is turned off.
F
The underlining in the variable range column indicates the setting in the preset mode.
Remarks
frame units.
The PRE REC function is not
operable.
duration
for
which
pre-
recording can be performed after
the REC START button is pressed
is set here.
7-2-2 OUTPUT SEL
Item/
Variable
Data storage
range
OUTPUT CHAR
TC
For setting the type of characters to be
STATUS
superimposed onto the output signals of the
MENU
VIDEO
ONLY
connector.
TC:
The time code is displayed. (The menu
appears when the menu is displayed.)
<Note>
The time code display position moves
vertically in accordance with the camera ID
position.
STATUS:
All the same characters as the ones
superimposed on the viewfinder are
displayed. (The menu appears when the
menu is displayed.)
MENU ONLY:
Only appears when the menu is displayed.
Normally, nothing is displayed
C U F
VF MODE
EE/PB
EE/PB: The images are played back in the
EE
EE:
C U F
HD SDI P.SAVE
ON
For selecting whether to output the HD SDI
OFF
signal.
ON: The HD SDI circuit is set to the power
OFF: The signal output accords with the
C U F
HD SDI CHAR
ON
For selecting whether to superimpose
OFF
characters on the HD SDI connector signals
in accordance with the position selected by
the CHARACTER switch on the side panel.
ON: The characters are superimposed and
OFF: The characters are not superimposed.
C U F
HD SDI METADATA ON
For selecting whether to output the metadata
OFF
to the HD SDI signal.
ON: The metadata is output.
C U F
OFF: The metadata is not output.
DOWNCON
ON
For selecting whether to output the down-
P.SAVE
OFF
converted signal.
ON: The down-converter is set to the power
OFF: The signal output accords with the
C U F
DOWNCON CHAR
ON
For selecting whether to superimpose
OFF
characters onto the down-converted signal in
accordance with the position selected by the
CHARACTER switch on the side panel.
ON: The characters are superimposed and
C U F
OFF: The characters are not superimposed.
DOWNCON SETUP 0%
For setting the setup level of the down-
7.5%
converted output signal.
C U F
Remarks
OUT
connector
and
HD
SDI
playback mode.
The camera images are displayed all
the time.
save mode, and the signal is not output
at any time.
position (VTR, CAM or OFF) selected
by the OUTPUT SEL switch.
output.
save mode, and the signal is not output
at any time.
position (VTR, CAM or OFF) selected
by the OUTPUT SEL switch.
output.
77
7
Hide quick links:
Advertisement
Table of Contents
