Tc/Ub; Umid Set/Info - Panasonic AJ-HDX400P Operating Instructions Manual

Chapter 7 Menu description tables

7-8-7 TC/UB

Item/ Variable
Data storage range
TC MODE DF For selecting the TC mode.
NDF DF:
NDF: Non-drop frame
C U F
UB MODE USER For selecting the UB mode.
TIME USER:
DATE Selects the UB value set in the LCD
EXT section.
TCG TIME:
FRM RATE Selects the local time (hour, minute,
REGEN second).
DATE:
Selects the local date and time (last 2 digits
of year, month, date, hour)
EXT:
Sets the UB from the TC-IN as the slave.
The user value is retained if no value can
be read.)
TCG:
Inputs the TCG value unchanged.
FRM RATE:
Selects the same camera shooting data
(frame rate, etc.) as the VAUX UB (VITC
UB).
REGEN:
Reads the value recorded on the tape and
C U F
then continues to record from that value.
VITC UB MODE USER/EXT For selecting the VAUX TC (VITC) UB mode.
TIME USER/EXT:
DATE
TCG
FRM RATE
REGEN
TIME: The local time (in hours, minutes and
DATE: The local date (last 2 digits of AD
TCG:
FRM RATE:
REGEN: The value recorded on the tape is
C U F
TCG SET HOLD ON For selecting ON or OFF for the function that
OFF without fail uses what was previously set as
the TCG value for recording when the TCG
value had been set before the power was
turned off and recording was then performed
after the power was turned back on again.
C U F
FIRST REC TC REGEN For selecting whether or not to regenerate the
PRESET time code as the value on the tape during the
first recording after the power was turned on,
the cassette was inserted or a playback or
C U F
search operation was performed.
The underlining in the variable range column indicates the setting in the preset mode.
Remarks
Drop frame
When EXT is selected as the UB MODE
setting, the value concerned applies; with
any other setting, the USER value set by
UB is recorded.
seconds) is selected.
year, month, day and hours) is
selected.
The TCG value is used as is for UB.
The same shooting information (frame
rate, etc.) of the camera as for VAUX UB
(VITC UB) is selected.
read and recorded continuously.
Item/ Variable
Data storage range
P.OFF LCD ON For selecting whether or not to set the LCD's
DISPLAY OFF time code and display its count while the
power is off.
ON: The time code can be set and
OFF: While the power is off, the power to the
C U F
TC OUT TCG For selecting the TC OUT output.
TCG/TCR TCG:
TCG/TCR: The time code generator value is
C U F

7-8-8 UMID SET/INFO

Item/ Variable
Data storage range
COUNTRY NO-INFO For inputting the name of the user's country.
"NO-INFO" is displayed until this is input.
C U F
ORGANIZATION NO-INFO For inputting the name of the user's
organization or company.
displayed until this is input.
C U F
USER NO-INFO For inputting the user's name. "NO-INFO" is
displayed until this is input.
C U F
DEVICE NODE For displaying the ID number of the product.
Remarks
displayed even while the power is off.
LCD section is turned off, and the time
code can be neither set nor displayed.
The time code generator value is
always output.
output with the E-E setting and the
time code reader value is output with
the playback mode.
Remarks
"NO-INFO" is
97
7