Align the riser board with the corresponding connectors on the system board, and then press down
2.
the PCI riser cage.
Push down the release tab, rotate it 180° clockwise, and then press it flat on the PCI riser cage.
3.
Primary PCI riser cage
o
Secondary PCI riser cage
o
Install the access panel (on page 25).
4.
Do one of the following:
5.
Slide the server into the rack.
o
Install the server into the rack
o
Power up the server (on page 20).
6.
Remove the air baffle
("Installing the server into the
rack" on page 35).
Operations 28