Remove The Access Panel - HP ProLiant DL180 Gen9 User Manual

Open the cable management arm. The cable management arm can be right-mounted or
2.
left-mounted.

Remove the access panel

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
CAUTION: Do not operate the server for long periods with the access panel open or
removed. Operating the server in this manner results in improper airflow and improper cooling
that can lead to thermal damage.
To remove the component:
Power down the server (on page 20).
1.
If you are performing a non-hot-plug procedure, remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 20).
o
Remove the server from the rack (on page 22).
o
If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch.
4.
Open the locking latch.
5.
The access panel slides back, releasing it from the chassis.
Operations 24